Accessories

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

Swank is retro-value for modern times, carrying the freedom of youth into the excitement and unpredictability of tomorrow. Swank’s light frame is designed for a no-slip fit and is equipped with shatterproof, scratch-resistant lenses covering a spectrum of popular colors.

Simple, ultralight, packable. Bring this just-in-case waist pack with you on any trip where additional carry options may be needed. Two zippered compartments with internal organizers keep your daily essentials organized and close at hand. When not needed, this waist pack stuffs into its own pocket, awaiting your next adventure. Built with an eye toward sustainability using high-quality bluesign approved recycled fabrics.

Perfect for long journeys and amazing destinations. A strong and durable full powder coat finish keeps drinks tasting great, while the double-wall vacuum insulated stainless steel keeps them hot or cold for hours on end. The tumbler lid features tri-mode flow control, and the tapered design allows for a comfortable grip and a perfect fit in most cup holders. A non-slip silicone pad on the base grips surfaces to avoid scratches and spills.

Chain locks have always enjoyed great popularity among experienced cyclists. This is not surprising, as they have some unique properties. Just like the Catena 6806. For one thing, the lock is lightweight and easy to transport. It can be stored folded in a bag or alternatively wrapped around the seat post of the bike. On the other hand, it is so flexible that it is possible to chain your bike to almost any location without any problems. The Catena 6806 can still fit in even in the tightest of spaces and can be used whenever the bike is used. Technology: - 6mm thick square chain with textile sleeve that prevents damage to paintwork - The chain is made of specially hardened steel Operation and use: - Good protection at low theft risk - Recommended for securing entry-level bicycles

Topeak's iPhone DryBag keeps your cellphone dry no matter the weather. Composed of water-resistant fabric with a clear TPU window and a flap that folds over the opening and prevents water penetration, the DryBag is a safe-haven for your tech-tools. Plus, it sports vibration-damping foam and Topeak's QuickClick mount that allows you to quickly attach it to your handlebars or stem.

So you like to keep your rig running minimalist but practical? The Road Bandit is the best of both worlds in terms of simplicity and utility for road riders. The patent-pending Road Tube Spool was integrated into the design, making it extremely user friendly. Its compact form bolts under your SWAT-compatible saddle and features a simple, Velcro strap and securely holds your tube, CO2, CO2 nozzle and tire lever (included). One rip of the strap and you're in, with everything you need to fix a flat when time is of the essence. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Fits up to 80mm-long tube valve stems. - Holds a single threaded 16g CO2 cartridge. - Patent-pending Tube Spool allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - Tire lever and CO2 head included; tube and CO2 cartridge sold separately. - Tough, lightweight, water resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts.

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Fuel your ride without losing your momentum. With a one-handed cord opening, secure 3 point attachment system, and 2 extra pockets, the Willis Stem Bag makes it a snap to grab water or snacks without stopping. Plus, it’s sustainably made with recycled Repreve® lining to support you on any adventure. Size: W 9" x H 5.25" x D 3.5" Volume: 1.8L / 110 cubic inches Weight: 0.5 lb Weatherproof design with PU coatings on all exterior and interior fabrics. Made of polyester with faux leather accents and reflective detail on front. 2 exterior pockets, including a stowaway pocket for shoulder strap while riding, and 3 interior pockets Includes one adjustable and detachable shoulder strap that extends to 56" at longest length Made in Vietnam

- Extremely lightweight - Shock-resistant high performance plastic - Easy quick-release-fastening by powerstrap for all seatposts - Black - 140g

Stay pumped. An incredibly easy-to-use gauge is paired with a stable base and durable body for an ideal go-to pump for inflating any bicycle tire. Where it thrives: In the garage What it's built for: Efficiency, Stability Highlights: - Tough steel base, durable barrel / extra-large 5" (130mm) gauge offers increased readability - Recommended pressure ranges help select suitable tire pressure - AutoSelect head adjusts to Schrader and Presta valves

Connect. Track. Share. The TICKR heart rate monitor accurately tracks your heart rate and calorie burn during any activity or workout. It's new design makes it one of the lightest and slimmest heart rate monitors! Equipped with Bluetooth and ANT+ technology, TICKR offers an easy and reliable way to connect heart rate to your favorite training apps and fitness devices, and now supports up to three simultaneous Bluetooth connections. The new integrated heart rate sensor and strap design provide a more secure connection and fit, so your training can be optimized, measured, and shared.

When you're looking for that piece of gear that will give you an extra boost of confidence as you push your limits on the trail, the Tempo is where to turn. Featuring Giro's new medium Expansion View Technology (EXV) frame paired with the crisp optics of their True Sight lens, this goggle delivers the comfort and sharp vision that inspire confidence anywhere from your local loop to the bike park.

The SuperBand is a tough, lightweight, and simple solution to attach virtually anything to your bike. - Fits all size smartphones with or without a case (iPhone 10/X, 11, X plus, 7, plus, 8 plus, Samsung Galaxy, Samsung Note, Google Pixel 2, Google Pixel 2 XL, OnePlus, etc.) - Easily holds down small items such as a light jacket, sunglasses, energy bars, pump, tubes, C02 cartridges, water bottle, flashlight, Bluetooth speaker, etc. - Easily attaches to the top tube, stem, or seat post using durable rubber O-rings (2 sizes included) - Can be attached to the water bottle bolts or a separate water bottle bracket - Use on a bicycle, golf cart, stroller, ATV/UTV

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.

Blackburn's CO2fer Mini-Pump is a cleverly designed and fully functional mini pump that allows a CO2 cartridge to stow away inside and that can be quickly rearranged as a CO2 inflator. - Mini pump designed specifically for mountain bikes with 50 psi maximum - Blackburn 16g threaded CO2 cartridge included - 191g / 0.42lbs

Pack it up: Contain saddle bags offer simple and effective solutions to keep your essentials stored securely and easy to access. Where it thrives: On the bike, out in the elements What it's built for: Convenience, durability Highlights: - Velcro attachment to saddle rails and seatpost - Water-resistant nylon construction and waterproof zippers - Rubberized fabric, reflective tape, with a light clip/strap

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill Tough enough to tackle any ride, the Podium® Steel is built for life on and off the road. Made from premium 18/8 stainless steel, this sleek bottle combines rugged durability with a streamlined design that's always close at hand but stays out of your way. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Left-hand loading on the down tube—right-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount Road or MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 33g

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

It's a bike bag, crossbody, or a waist pack, this bag is the meaning of versatile. A magnetic one handed flap closure makes sure you can easily access what you need. Making a pit stop? Pull out the stowable strap and wear crossbody or on your waist. • Quick access mesh side pockets • Easy to access magnetic closure • Two internal mesh storage pockets • Mount on handlebars or wear crossbody • Stowable crossbody or waist strap

Perform at your highest potential with GU Energy Gel. The 3:1 ratio of maltodextrin and fructose spares your limited glycogen stores with a combination of slow and fast-absorbing carbohydrates. The electrolytes sodium and potassium are just what your legs crave to stay firing properly. Branched-chain amino acids speed recovery and reduce muscle damage, and of course the delicious flavors go down easy.

Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.

With the Flash Headlight/Taillight Combo, you're equipped with everything you need to be seen—day or night. It features up to 70 lumens in the front and 20 lumens in the rear, and it features the versatility of four light modes, ranging from steady and strong to flashing and brilliant. Increase your visibility with the Flash Headlight/Taillight Combo. - Headlight: 20- to 70-lumen output. - Headlight: 2 hours to 24 hours runtime. - Tail light: 5- to 20-lumen output. - Tail light: 2 hours to 20 hours runtime. - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays, helmets, and saddle bags. - Four headlight modes including: Steady (55 lumens), Power Flash (70 lumens), Disco Flash (55 lumens), Eco Flash (20 lumens) - Four taillight modes including: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens)

Sunlite's Willow Classic Basket attaches to your handlebars via leather handlebar straps and buckles so it will be ready for a spontaneous jaunt to the park! The tightly-woven willow ensures small items stay in the basket, and the cool design is sure to elicit compliments.

Specialized's Air Tool Sport Floor Pump boasts all-steel construction, durable internals, a long hose, a sturdy handle and a three-sided base for easy pumping and excellent stability. You also get Specialized's SwitchHitter head that automatically adapts to fit Presta and Schrader valves, and an easy-to-read, 2-inch gauge to make dialing in the right pressure a breeze.

High-pressure shock pump with gauge Our Shockmate 3.0 high-pressure bicycle suspension pump is designed to efficiently and accurately maintain your bike’s suspension to ensure that your shocks are neither too stiff nor too soft. It's compact and rugged and features an 8" swivel hose and alloy valve head for secure attachment and easier pumping. The easy-to-read gauge and bleeder valve help you fine-tune the suspension sag on your bike's front and rear shocks to give you the best ride performance. Whether you have a mountain bike with full suspension or just a fork shock, take the Shockmate 3.0 along on your next backcountry adventure. - Compact and rugged design is ideal for backcountry adventures - Locking T-handle for comfortable and efficient pumping at high pressure - 8" swivel hose and alloy valve head for secure attachment and easier pumping - 1.5" industrial grade gauge is precise and easy to read when setting suspension shock sag - Bleeder valve for fine-tuning pressure - Rebuildable - Length: 260mm - Weight: 149 grams